1. 設備名稱The equipment name：便攜式數顯硬度計Digital portable hardness tester

2. 型號Type：COMPUTEST SC

3. 生產廠家The manufacturer：瑞士ERNST公司

4. 執行標準According to standard：EN 10109-3

5. 技術參數：Technical characteristics

5.1 預載荷Preload:1.2 kg (11.8 N)

5.2 工作載荷Load: 5 kg (499 N)

5.3 標尺及測試范圍Scale and testing scope：

l HRC 10-70

l HRB 0-120

l HB/30 80-700

l N/mm² 266-2180

l Kg/mm² 27-222

l HV 35-1080

l Depth 0-100

5.4 直接數顯Reading：液晶顯示屏Digital Liquid Crystal Display 80×30mm

5.5 理想狀態下的示值誤差：符合ISO及GB/T

Error testing under ideal condition: according to ISO and GB/T

5.6 理想狀態下的示值重復性：符合ISO及GB/T

Reproducibility precision under ideal condition: According to ISO and GB/T

5.7 測試方向：任意Testing direction: any way

5.8 存儲文件個數Files available：8

5.9 存儲容量Memory：1000個值

5.10 軟件的功能The functions of the software：

標尺選擇，公差設定，硬度計自標定，語言選擇，標準偏差、最小可測量厚度和柱面硬度修正等Possibility of setting the tolerance field within the serial testing, know the minimum measurable thickness, set the loading time and elaborating the statistics.

5.11 輸出Exit： RS 232C

5.12 電源：100－230VAC，單相，50/60Hz(充電電池8小時/次)Power supply: 100－230V，AC,50/60Hz(Battery 8 hours/charge)   

5.13 工作環境：0－50℃，10%－90%。Working temperature and Relative humidity: From 10° to 50°.From 10% to 90%

5.14 最小可測量直徑：采用支架時為￠1.5mm，采用V型砧板時為￠10mm。Minimum measurable diameter：With stand: 1.5 mm, by hand with V-base: 10 mm

5.15 毛重：About weight: 6.8kg.

5.16 包裝尺寸：Packing dimensions:  440 x 520 mm x 270 mm.